I spent a lot of time today reading the specifications of Indian electrical sockets, and since it took me way too long to find this information - here’s a quick summary of what the different kinds of sockets mean. I hope at least one other person finds this useful.
I have a nice little computer in my house which hosts a bunch of services I use. It sits behind a NAT, so I can’t connect directly to it via my public IP address. Hence, I use a cheap cloud instance on DigitalOcean to act as the gateway for my home-server to the internet.
My previous setup was basically a VPN tunnel between a cloud server and my home server, where the cloud server forwarded TCP traffic to my home server, which served all my services.
Lately, I’ve been rebuilding this infrastructure, and one of the things I was due for, is to have all my devices (my cloud server, home server, laptop, phone, etc) connected to each other all the time. Also, it needed to be in a mesh instead of hub-and-spoke, as there was no need for data to go over the internet if I’m home, on the same physical network as my home-server.
I spent a good amount of time trying out a bunch of methods, until settling on one. This post runs through all the options I found, and why I chose what I chose. I won’t go into how to set it up - there should be plenty of articles and documentation on the internet. TLDR: I now use tailscale with a headscale server.
Jun 01, 2020
Post #1 in the Meta:Programming series.